Doepfer A-129-3/4 Vocoder Slew-Limiter/Attenuator/Offset a Manual de usuario descargar pdf (Pagina 6)

A-129 /3/4

Modular Vocoder

System A - 100

doepfer

4. In- / Outputs

! CV In 1 ... CV In 5

Sockets ! are CV inputs. This is where you patch in

the voltages you would like to modify - ie, attenuate,

offset, or smooth out by slew limiting.

" CV Out 1 ... CV Out 5

Sockets " are CV outputs, at which the modified

signals are available.

Each output signal is affected by a combination of

the attenuator, offset and slew limiter functions

§ Slew Control Input

Socket

is the input for the CV generated by the

A-129 /4 Slew Limiter Controller.

This input should be connected with output

on the

A-129 /4.

This is a specialised control signal which must

come

from the A-129 /4

. Connecting signals from

other modules won’t make sense.

$ Freeze Control Input

A gate signal at input $ freezes the slew limiter’s

output signal (see Fig. 3).

This function is only active when the switch

is in the ‘slew’ position.

Fig. 3: Using a gate signal to freeze a voltage

Out

Freeze

Contr.

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Doepfer A-129-3/4 Vocoder Slew-Limiter/Attenuator/Offset a Manual de usuario Pagina 6