Doepfer A-190-4 MIDI/USB-CV/Gate/Sync Interface Manual de usuario descargar pdf (Pagina 16)

USB/Midi-to-CV/Gate A-190-4 System A-100 DOEPFER

4.3.6 INITIALISE Function InI

You may want to erase all your parameter settings and

reset the values back to their defaults. If so, please use

the Initialise function.

Please navigate to the Initialise function with the ”>/+“ and

”</–” buttons.

• Hit ”

 ”. The display shows no The ”>/+“ button

flashes.

• Hit “

 “ again or ” 2 “ to cancel the Initialise

function.

• Hit ”>/+“ to initialise all parameter settings to the

values shown in the following chart.

To confirm the store function, the display shows YES

for a short moment.

The following chart shows the initial parameter values:

Parameter Value Notes

CHANNEL 1 MIDI channel #1

REF. NOTE 24 #24 / Note C2

CLOCK TIME 1 clock frequency at clock output

= MIDI clock frequency

CLOCK POLARITY PoS positive

RETRIGGER 0 legato - ie. no retrigger

LFO FREQ. 006

LFO AMPL. 0 LFO off

PORTAMENTO 0 no portamento

BEND WIDTH 12 1 semitone

ASSIGN CV2 vEI velocity

ASSIGN MODE Hig highest note

GATE POLARITY PoS positive

RTRIG. TIME 0 off

CV CHAR. U-O 1 V / octave

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22

Sin comentarios

Doepfer A-190-4 MIDI/USB-CV/Gate/Sync Interface Manual de usuario Pagina 16