Doepfer A-190-4 MIDI/USB-CV/Gate/Sync Interface Manual de usuario descargar pdf (Pagina 18)

USB/Midi-to-CV/Gate A-190-4 System A-100 DOEPFER

CONTROLLER #92 (Tremolo)

This controller affects the LFO frequency (please refer to

LFO menue / frequency parameter). When using this

controller, parameter changes are only temporary. If you

want to save the new setting permanently, please use the

Store function (see page 15).

Value range: 0 to 127 LFO frequency

CONTROLLER #121 (All Controllers Off)

If this MIDI controller with any value is sent to the

A-190-4, the LFO amplitude will be set to 0 (although the

LFO keeps running at the same frequency) and

portamento is switched off.

Value range: 1 to 127 (any value)

CONTROLLER #123 (All Notes Off)

If this MIDI controller with any value is sent to the

A-190-4, the gate is turned off, and all notes in the

A-190-4’s memory are cleared. Control voltages remain

at the level at which they were set at last. This function is

useful to clear ”hanging notes“.

Value range: 1 to 127 (any value)

Controller Effect Setting

Cont # 01 n

Modulation

n = LFO voltage amount sent to

CV1

Cont # 05 n

Glide Time

Portam. Time = n x 20 ms

Cont # 64 n

Sustain

n = 0 to 63 : Off n > 63 : On

Cont # 65 n

Glide

n = 0 to 63 : Off n > 63 : On

Cont # 68 n

Retrigger

n = 0 to 63 : Off n > 63 : On

Cont # 92 n

LFO Freq.

n = LFO frequency (CV 1)

Cont #121 n

All Cont. Off

n can be any number.

LFO modulation amount = 0,

Glide off

Cont #123 n

All Notes

Off

n can be any number.

All notes off, GATE = off

List of recognised MIDI controllers

(they cannot be linked to CV2)

1 2 ... 13 14 15 16 17 18 19 20 21 22

Comentarios a estos manuales

Sin comentarios

Doepfer A-190-4 MIDI/USB-CV/Gate/Sync Interface Manual de usuario Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Audio Doepfer A-190-4 MIDI/USB-CV/Gate/Sync Interface