Doepfer A-191 Shepard Generator/16xMIDI-CV Interface (no l Manual de usuario descargar pdf (Pagina 7)

doepfer

System A - 100

MCV 16

A-191

4.3 In- / Outputs

! CV outputs

Sockets

are the MIDI-CV interface’s CV outputs:

LFO • LFO • LFO

These sockets are the outputs for the sawtooth,

triangle and rectangle waves produced by the inter-

nal LFO.

LEDs

and

give an indication of the

voltages at the sawtooth and triangle wave outputs.

H Don’t forget that the LFO will only work if a

MIDI clock is being received on the selected

MIDI channel (see chapter 4.1, Basics).

AT • ... • C16

These 13 sockets output the control voltages conver-

ted from their respective

MIDI controllers

(see table

1). Their voltage range is from 0 V to +5 V.

" MIDI In

This MIDI input socket should be connected to the

MIDI keyboard or sequencer, etc., that you want to

control the System A-100, with a standard MIDI lead.

As well as converting MIDI controllers After Touch,

Pitch Wheel, #01, #02, #04 to #08, #10, #11, #12 and

#16, and turning them into voltages available at the

corresponding CV outputs (see table 1), the A-191

also responds to MIDI clock - and to MIDI controller

#92 ("Tremolo Depth") for controlling the internal

LFOs.

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

Sin comentarios

Doepfer A-191 Shepard Generator/16xMIDI-CV Interface (no l Manual de usuario Pagina 7