DOEPFER A-100CGK Guía de usuario descargar pdf (Pagina 8)

Operation

A-100CGK is switched on by plugging the AC adapter into a wall outlet and

connecting it to the appropriate power supply socket n. There is no separate

ON/OFF switch.

After power on the six LEDs will light up for a short time and the display shows the

software version (e.g. 100 for version 1.00). Otherwise the AC adapter used is not

suitable, has the wrong polarity or does not work.

Controls

Display: 3 digit LED display

Six buttons with corresponding LEDs:

•

four to select a menu (MODE, TRANSP., RETRIG., HOLD)

• two as up/down buttons (UP, DOWN)

A menu is activated by pressing the corresponding menu button. The active menu is

indicated by an illuminated LED. The up/down buttons are used to increase/decrease

the value of the currently selected parameter. In addition the value of the currently

selected parameter can be increased by pressing the menu button in question again.

To exit a menu another menu button has to be pressed.

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

DOEPFER A-100CGK Guía de usuario Pagina 8