Doepfer A-190-1 MIDI-CV/Gate/Sync Interface Manual de usuario descargar pdf (Pagina 5)

doepfer

System A - 100

MIDI-CV/SYNC Interface A-190

4.1 Using the A-190

On power up, the A-190 defaults to Performance

mode

. This is the normal mode of operation, in which

the incoming MIDI information is converted to CV, gate

and clock signals, according to the A-190’s settings.

You can check you’re in performance mode by seeing

if all the

menu LEDs

(

) are

off

. The gate LED

reset LED

and clock LED

will light up in response

to MIDI activity:

Since the A-190 gives you so many options for chan-

ging the way MIDI information is converted, it was

necessary to use a menu system for setting the va-

rious parameters. There are two groups of menus,

with six menus in each.

The performance menus are where you can change

important playing parameters such as bend width

and portamento time - the sort of parameters to which

you need easy and frequent access .

The Config menus, on the other hand, contain confi-

guration parameters

, which are fundamentally impor-

tant to the whole MIDI set-up, but as a rule don’t need

to be changed often (for instance gate polarity, voltage

response, or re-trigger time).

To alter parameters, you need to be in edit mode. The

procedure is as follows:

• Select the menu group

• Switch to edit mode

• Select the menu which contains what you want to

edit

•

Alter the parameters either manually or by MIDI

•

Return to performance mode.

Selecting menu group

The A-190 is designed so that, after power up, the first

time you enter edit mode, you automatically go to the

performance menu group.

Performance-Mode

Clock

Reset

Gate

1 2 3 4 5 6 7 8 9 10 ... 21 22

Comentarios a estos manuales

Sin comentarios

Doepfer A-190-1 MIDI-CV/Gate/Sync Interface Manual de usuario Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Audio Doepfer A-190-1 MIDI-CV/Gate/Sync Interface