Doepfer A-190-1 MIDI-CV/Gate/Sync Interface Manual de usuario descargar pdf (Pagina 8)

A-190

MIDI-CV/SYNC Interface

System A - 100

doepfer

4.2 CONFIG menus

CHANNEL / REF. NOTE

The CHANNEL parameter sets the MIDI receive

channel.

In performance mode, MIDI messages re-

ceived on this channel are converted to CV and gate

signals and sent to whichever modules are connected

to the A-190 - either via the system bus or via patch

leads.

REF. NOTE sets the bottom note on the MIDI key-

board which will play the lowest note on the A-100

VCOs. As a rule, this is MIDI note number 36.

NOTE ON ch n vel

ch : MIDI channel

n : MIDI note number

H Note that playing a note on the key-

board will set MIDI channel and bot-

tom note at the same time.

This method of setting the MIDI chan-

nel is preferable to the performance

mode method, which has no confirma-

tion.

[

Change the bottom MIDI note (0 to 127)

]

GATE POLARITY

This parameter sets the polarity of the gate voltage.

For use with the A-100, this parameter

should always be set to positive. The only

time you may need to alter it is to control

certain other makes of synthesizer.

positive: PROG CHANGE 1

negative: PROG CHANGE 2

Config Menu 1

CV 1

+12 V ....

0 V ..

+12 V .

0 V ...

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 21 22

Comentarios a estos manuales

Sin comentarios

Doepfer A-190-1 MIDI-CV/Gate/Sync Interface Manual de usuario Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Audio Doepfer A-190-1 MIDI-CV/Gate/Sync Interface