Doepfer A-190-1 MIDI-CV/Gate/Sync Interface Manual de usuario descargar pdf (Pagina 9)

doepfer

System A - 100

MIDI-CV/SYNC Interface A-190

CV CHAR.

This parameter sets the voltage control characteri-

stics of the pitch CV output from the A-190, so that it’s

possible to drive both common types of analog synth -

older Korgs, Yamahas, etc., which have a linear re-

sponse (Hz / V), and Rolands, ARPs, Moogs, etc.,

which have a logarithmic response (1V / octave).

For use just with the A-100, the V / octave

response is all that is needed. The Hz / V

option is provided purely for connecting to

external synths which use that standard.

V / Octave

PROG CHANGE 3

Hz / V

PROG CHANGE 4

RETRIGGER

This parameter enables you to choose between single

and multiple triggering of the ADSR. With RETRIG-

GER on, every time a key is pressed,

another gate

signal is sent, even if (ie in legato playing) another

key is still held down at the time.

OFF : PROG CHANGE 5

ON : PROG CHANGE 6

H This parameter can also be changed in per-

formance mode. If, even with RETRIGGER

ON, the gate isn’t reliably re-triggered, set a

higher value for the gate retrigger time in

CONFIG menu 5.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

Sin comentarios

Doepfer A-190-1 MIDI-CV/Gate/Sync Interface Manual de usuario Pagina 9